Feedback Form
Wednesday 8th February 2012

Posts Tagged ‘boiler service’

A Layman’s Guide to Boiler Efficiency

Tuesday, February 17th, 2009

Green Piggy BankThe more efficient your boiler is the less energy it will use, which will result in you saving money on your gas bills. Is it possible to  increase the efficiency of your boiler? It sure is, here are the top five ways to make your boiler more energy efficient.

1. Replace it with a new SEDBUK ‘A’ rated boiler! This is not something you can do immediately and it can be expensive but many new combi boilers have an efficiency rating of over 95%. By investing in a new boiler you could recoup your costs within a few years by paying less on your gas bills.
2. Schedule a service yearly. Some companies, such as British Gas, have monthly plans protecting your boiler from breaking down. Often the service plan will provide an annual service for free. A service will check the parts of your boiler and makes sure it is working at an optimum level.
3. Arrange a system power flush. Power flushing is a good way to remove the debris and limescale from your radiators and pipe work, this will allow hot water to flow freely around the system to warm the house better. The more easily the water moves, the more effective it is at heating the system and your boiler has less work to do. Simply, you get the same level of heating but use a lot less energy. Unfortunately power flushing can be expensive but it does increase your boiler’s efficiency quite dramatically and it will save you money in the long run – particularly if you have an older boiler and heating system.
4. Fit a magnetic filter and a limescale filter to your heating system. Magnetic filters are for removing iron oxide from the system which can improve your boiler’s efficiency and lower your energy usage. If you add a limescale filter you can also improve the quality of the water entering the system and remove the majority of the limescale before it reaches the boiler and starts to effect performance. Both a magentic and limescale filter are relatively cheap and can increase your boiler’s efficiency by a considerable amount.
5. Thermostatic radiator valves. Fitting these valves to all suitable radiators will allow you to vary the radiator temperature in each of the rooms in your house. This allows you to individually control the raditaors turning those you don’t use down and vice versa. By turning hardly used radiators down you use less energy and increase your boiler efficiency – an easy way to save money.

There are many ways to increase your boiler’s efficiency to save money.  If you implement all the things we have suggested here then you would have a clean, energy efficient heating system, and it wouldn’t take too long to recover your investment.

Guest Article by Clare Lynock

What’s Cheaper – Ad Hoc Boiler Servicing, or Boiler Insurance Cover?

Wednesday, January 28th, 2009

Right, this sort of question is one of those tricky little conundrums that really depends on various factors and your personal situation.

And like most insurance situations, you have to weigh up what suits you in terms of the risks involved.

Let’s take the boiler. Nowadays they are quite complicated pieces of kit and whereas one might last 15 years without a hitch, another one might break down on regular intervals. And who’s to stay why. Take cars for example. We’ve all known cars that go on for mile after mile without so much as a kind word. Yet we’ve known others that breakdown if it’s raining.

So, if you own a modern, latest specification boiler with a nice guarantee, then maybe you are safe at least for the first year. But do read the small print on the guarantee as, let’s be honest, a number of companies have a way of getting out of any commitment if they can.

But once out of the guarantee period, you are then starting to run the risk of what happens if a major failure occurs? Modern new boilers can cost anywhere from £250 to £3,000, depending on the size of your property. So, if you have an expensive boiler, then you might want it covered. Mind you, even if you don’t have an expensive boiler, the cost of replacement could still be, in relevant terms, a fortune, given your own personal budget. What effectively an insurance plan does, is to spread the cost of a new boiler over a number of months, if you assume the worse and think that your boiler will inevitably breakdown. And, that’s assuming it requires a complete replacement, rather than just parts.

So lets say you take out a monthly policy of between £10 and £15 a month, which will cost you between £120 and £180 a year; it’s cheap if you’re boiler breaks down. But let’s say it doesn’t break down for five years, then the total cost would have been £600 to £900, maybe twice as much as a new boiler for an average house. But, who can say? It’s your judgement and your risk.

But, if there’s one strong argument for getting insurance, it’s that you have someone else paying your boiler attention. Boilers should be serviced once a year, otherwise you not only run the risk of having an inefficient boiler which is costing you more money than it should, but you are risking your own and your families’ lives. A faulty boiler can kill; it’s that simple. Carbon monoxide poisoning from faulty boilers kills around 30 people in the U.K. every year.

Now, to get your boiler serviced, you have to remember to book and arrange a Corgi-registered engineer to do the job. Boiler servicing is, by law, a job for a professional. DIY servicing certainly is not allowed and should not be tried, nor can some odd-job man do it for you.

So, a boiler service can set you back at least £95, so if you think that an insurance plan can start from £120 (and includes a yearly service), then it would make sense to pay that bit extra, spread over monthly payments anyway. And apart from the economic argument, you also have someone who will remind you about your service and arrange to do it. Which saves the hassle of you remembering your annual service and having to negotiate a service price.

Right, you pays your money and takes your choice, but on balance, a good boiler insurance seems sensible not only for your wallet, but also for your health.

Guest Article by Neil Camp

My Winter Energy Saving Plan

Tuesday, January 20th, 2009

Winter Fire with Family Feet imageVirtually everyone I know is dreading winter because of the extortionate energy bills that will come through the door in the spring. There are ways of cutting the amount of energy you use through the winter though and when used as a plan they can save you a decent amount of money. Below are ten good energy-saving tips to help get you started.

1. Have your boiler serviced during late autumn so that it is running efficiently for the start of the winter. This can also identify any problems that may arise when it’s being used day in and day out.
2. Bleed your radiators so that they warm your house as efficiently as they possibly can. If you have unused rooms in your house then you might want to manually turn the radiator off and keep the door of the room closed.
3. Draught-proof your external windows and doors to stop cold air coming in and warm air going out. This is an easy DIY job and all you need is some quite inexpensive weather strips and maybe a tube of caulk. You may also want to use good old fashioned draught excluders at the foot of your doors.
4. Turn your thermostat down by a degree or two and wear an extra jumper! A single degree can save up to 5% on your energy usage which can in turn save a good few pounds each month.
5. Insulate your loft and walls if you can afford it. There are government grants available to help with costs in most homes. In fact, many people can get full insulation for free if they receive specific benefits, and even if you don’t you can still save around 70% on the normal price.
6. Some say that keeping your home at a constant temperature of about 68 degrees costs less than letting your home go cold during the day or through the night and then turning your boiler up to re-warm to a comfortable temperature. This idea is often debated by gas engineers so please don’t take it as gospel.
7. Switch off any lights when they are not being used as light bulbs can use a fair amount of energy without you realising it. As an additional point you might want to think about using energy efficient bulbs as they are often less than £1 each now.
8. Have showers instead of baths whenever you can, especially if you have a shower that heats the water itself and doesn’t involve the boiler. It has been estimated that a family of four can save up to £90 per year by taking showers instead of baths.
9. Check online to see if you can save money by changing to a different energy supplier. Some may offer the same prices but will guarantee a price freeze for the next few years – which will save you in the long run.
10. If all else fails, visit as many of your friends and relatives as you possibly can each evening and make use of their energy instead of your own!

Guest Article by Clare Lynock

See also: Top Ten Tips for Saving Energy Around the Home

Top Ten Tips for Saving Energy Around the Home

Monday, January 19th, 2009

Money Saving Light Bulb imageLet’s face it, energy costs a fortune and even if the credit crunch brings a respite to the oil and gas prices, once things recover economically, then they will go up again.

So, whatever steps you can do around your property, then it will undoubtedly save you money, not just for this winter, but for many winters ahead. What you need to do is a personal property energy audit. Take a couple of hours to have a look at your flat, or your house, and make a list of things that need attention.

And bear in mind that the Government is encouraging you to save energy. There are many organisations out there that will help you if you need advice on the grants and financial support packages. If you don’t ask, you don’t get, so make sure you claim for all that you are entitled to.

And here are ten things to have a look out for when you’re doing your own audit.

If you have one, start with your loft. A loft which is not insulated is literally throwing money away; over £200 for an average sized house. And even if you have insulation, check that it is in good shape and that it is the improved thickness of 270mm. It may well be that you had yours done some years ago and it needs sprucing up. And have a look at the vast range of products that are currently available on the market; get the best you can afford, it will pay back the investment in the first year.

Take a look at your hot water tank. Make sure it is well insulated. If it’s jacket is hanging off, then get it a new one.

Next have a look at your water tank and pipes, especially those exposed in the attic, or outside; make sure they are all lagged and not suffering from corrosion.

Once you have the insulated the loft, how well is the rest of the house insulated? Have you considered cavity wall insulation for example? Again, as with the loft, heat pours out of a house through a wall which does not have the benefit of being insulated.

Another great bonus is double glazing. This can be a pricey option, but well worth it if you need your windows replacing either as one job, or section by section. If you don’t want to spend a fortune on double glazing, then consider a DIY window insulation kit through the winter as this could have the same effect.

Have a think about draughts. Look around the window frames, around the door frames and any holes (not ones that are there to allow the house to breathe) that allow cold air in. It’s amazing what gaps you might find that is letting your precious heat out. Gaps under doors are big culprits, so think about using curtains, door insulators, or bolsters to keep out the icy cold air.

So once you think you’ve covered the insulation and draught issues, turn your attention to your boiler. Is it serviced once a year? If not, it really must be looked at as soon as possible. Four out of ten people don’t give their boiler an annual service. So four out of ten people are risking theirs’ and their families’ lives to the dire effects of carbon monoxide poisoning. Over 30 people a year die of this and it’s all down to faulty boilers. And even this horrendous risk to one side, an unserviced boiler is an inefficient boiler. It won’t work as well and will cost more to operate. Get it looked at.

Staying with the boiler, is it of the latest design and type. The law says now that when replacing a boiler, you should buy, if appropriate, a High Efficiency (HE) boiler. These are called condensing boilers and are over 90% efficient. They achieve this by capturing the heat not only from the fuel combustion process, but also from the exhaust gases. And because this dual process requires an outside wall situated flue and drain pipework, they are not appropriate for every property (and so the law in that case will let you off). But if you have an old boiler it might only be just over 50% efficient, so try to replace it with a new one and it will be twice as efficient, making your fuel go further.

Right, boiler issues over, think about your central heating system. First, have you bled your radiators recently? If they feel cold halfway up, then find the plug key and bleed them. This removes the air locked in the radiator and allows the hot water to flow freely. If you don’t do this regularly, effectively all radiators could be working at half capacity.

Also, you could consider flushing out your heating system if it hasn’t been done for a few years. Water within the system can turn into a horrible black sludge, especially if it hasn’t been operating at its optimum level for some time. And this black sludge slows the system right down, meaning that it quickly becomes far less efficient. So, a power flush is often a sound idea as it will literally blast your system free of most of the dirty sludge and residues. It’s not cheap and should be done by someone who knows what they’re doing, but well worth it.

Finally, make sure you properly understand your thermostats and boiler controls. Thermostats allow you to judge the temperature in your rooms. But make sure they are sited properly – not in a cold room which gives the impression the whole house is cold, or not near a fire, which makes it think the whole house is warm. And check that the boiler settings are correct (they usually have few controls, but do check it’s on the right season – winter, summer – for example) and that the system is timed to come on and off at the right time.

So there you have it; a bit of attention to your property could save you a lot of money.

Guest Article by Neil Camp

See Also: My Winter Energy Saving Plan

Maintaining Your Gas Boiler

Wednesday, November 5th, 2008

Broken Gas Boiler Repair ImagePicture yourself sitting in your home in the middle of winter. You are enjoying the comfort and warmth of your heating system and suddenly the boiler goes on the blink. You are then left to make do with blankets and the old fan heater that’s been lying down in the basement for months. Even if you’re a bit of a DIY enthusiast, there will at least be an uncomfortable and uncertain period whilst you get the faulty appliance back up and running again. For the rest of us, boiler problems can cause huge inconvenience and discomfort, not to mention the worry and expense of getting someone trustworthy in to fix it.

That’s why so many people take proactive measures to make sure their gas boiler is kept healthy and serviced regularly by professionals.

Maintenance work should always be done on your boiler at least once a year, preferably well before winter starts, to minimise the risk of boiler breakdowns and the need for emergency boiler repairs. That way you can have everything properly checked out and replace whatever is needed well before the cold weather arrives. Some boiler manufacturers recommend that you run your gas boiler at least once a month, even during summer, just to keep it working smoothly and allowing you to detect any problems well in advance.

There are a few simple things you could regularly check on your heating system to aid maintenance and it won’t need a technician to help you out. You should check the outlets, or flues as they are called, for any blockages. It is important to make sure there is no congestion or build up of exhaust gases. Also try to make sure your gas boiler is kept clean and tidy as even dust can become a problem and it should never be covered with anything.

If you are confident at DIY, there are often telephone information lines that you can call to get help. Some manufacturers even have web-based support sections that provide interactive help and they will guide you through the entire service or repair process. Once you have diagnosed what the problem is, you can locate your local ‘heating and ventilation hardware’ store to get whatever parts or spares you might need. Either way, you do need to take care to get the job done properly as gas can be extremely dangerous and if something goes wrong there can be very serious consequences indeed.

Whatever your circumstances, prevention is always better than cure and a professionally maintained boiler will give years and years of reliable service. Apart from the peace of mind and security of knowing that you won’t be left without heating and hot water, your safety and the safety of those living with you will be assured. You can find lots of useful problem-solving tips and advice on boiler safety, as well as information and reviews on boiler servicing contracts, throughout this site.

Look after your boiler now and you can look forward to warm and trouble-free winters for years to come.

 

Guest Article by Max Rickman
 

Boiler Scrappage Advice Best Gas Boiler Offer Best Heating Boiler Insurance Cover Emergency Boiler Repairs

Want the latest boiler and energy news? Subscribe to our RSS feed. Subscribe

Blog Categories

The Editor

Alan PottsMy name is Alan Potts and I'm the Editor of the Gasboiler-BUYability web site and Managing Director of BUYability Limited. You can connect with me or keep up to date with new posts on this blog via the following social media sites:

Facebook LinkedIn Plaxo Twitter StumbleUpon Plurk FriendFeed Digg Technorati Delicious

© BUYability